Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning and hacking by using the first aftermarket CAN-Immobiliser. With the additional option of connecting to a Ghost app and GPS tracking system that can send you call alerts when your car is altered with or stolen.
The installation of a Ghost immobiliser can be completed by a qualified technician. It is crucial to have the appropriate tools and heat shrink tubing.
Getting Started
Ghost immobilisers can be a great alternative to physical theft devices like car alarms and wheel locks. They guard your vehicle without the use of LED indicators or key fobs. Instead they connect directly to the ECU's CAN network and will only start after entering a PIN code sequence. This gives a greater level of protection against key hacking, ECU swapping and cloning.
As a result, installing a ghost immobiliser Birmingham is a task that must be carried out with a high degree of speed and accuracy. It's like walking through a minefield. A mistake could result in serious damage to the circuits of your vehicle. It is crucial to know the procedure for installing and prepare your vehicle in a timely manner.
First, you must prepare the vehicle by removing interior panels to make space for the immobiliser unit. Once you've found the ideal location to hide it and secure it by using cable ties to stop it from being removed or damaged. Next, tidy up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover the exposed connections. This reduces the risk of an accidental short circuit while also improving the appearance and reducing the risk of theft.
Then, locate a source of constant 12V power as well as a grounding location for the ghost immobiliser. Once you've located these, test the power wires using a multimeter, to ensure they are delivering a consistent voltage. Connect the CAN H and L wires from the immobiliser to the designated power source and grounding point.
Once you've made all of the necessary connections It's crucial to double-check the connections and check the immobiliser for indications of corrosion or damage. It is also important to test the system to ensure it is working properly by entering a pin code and starting the engine. This should be a regular part of your daily routine as it will allow you to spot any issues that may arise early. Regular testing will also help to prolong the life of the device, and ensure that it is running at its peak performance.
Preparing your vehicle
Installing a Ghost immobiliser is a process that requires knowledge and tools. A wiring diagram is crucial to identify the right wires, making precise connections, and ensuring safety. A multimeter is a tool to test electrical values and guarantee security. Insulation tape and cable tie can be used to secure the connections and shield them from being tampered with. A user's manual is provided for the Ghost Immobiliser. It will provide you with specific instructions tailored to that model.
Once installed, the ghost immobiliser will prevent unauthorised engine starts by requiring the owner to input a unique code sequence using the buttons on the steering wheel or console. The code can be altered at anytime by the vehicle owner by hand or remotely via an app for mobile devices. The device is also quiet and unnoticeable by thieves as it does not emit any radio frequency.
Ghost immobilisers connect directly to the vehicle's CAN bus, which is a network that connects to all of the electronic control units (ECUs). It intercepts signals from the ECUs and prevents the engine from starting if a false signal is detected. The system is tamper-proof as well as weatherproof, with no LED indicators or key fobs to draw the attention of thieves.
It can be mounted behind the dashboard or in a hidden location, so that it is not visible to thieves and does not hinder the performance of the vehicle. It can be tucked away in a small container so that it is less likely to be noticed by fraudulent salespeople when they test drive.
Its sly operation, coupled with its integration into the vehicle's CAN-bus system, is an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent thieves. This is why more insurance companies are now recommending or even requiring ghost immobilisers to be installed, as it will significantly lower the cost of insurance.
Making the Connections
Ghost immobilisers are completely silent, unlike traditional security systems, which can be heard by thieves. They prevent them from knowing that your vehicle is running. car immobiliser ghost block high-tech methods of stealing vehicles, like OBD hacking. Installing them without leaving permanent marks on your vehicle is an excellent option for those who plan to sell the car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to prevent car theft. linked website makes use of the CAN data network to deactivate your engine and generates a pin code that only you know, meaning it's hard for thieves to identify. It can be used on a wide range of vehicles, and it works with a variety of features already installed, such as car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you decide to install an Ghost immobiliser for your vehicle, be sure to refer to the wiring schematic to identify the wires that connect. Double-check the locations of these wires to ensure accuracy and mark them using labels or tape to help you keep track of them. You will also need to locate a source of constant power (12V) and a grounding point for the system. Once these are in place, you can begin making the connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start until the pin code is entered through the buttons of the steering wheel or dashboard. This will stop ECU replication and other methods of vehicle theft. It can also be used with other Thatcham approved security equipment like alarms or tyre clips to provide your vehicle with an even greater security level.
As the UK automotive industry continues to expand, as do the options available to secure your car. There are many ways for thieves to gain access into your vehicle and steal it, so it's important to do all you can to stop it from being taken. Ghost immobilisers are a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through an CAN network. This prevents the engine from being started until the PIN code has been entered. This makes it very difficult for thieves copy your key fob to open your vehicle, and even more difficult to disable the system by hacking its electronics.
Ghost Immobilisers are also able to be used in conjunction with GPS tracking devices that will assist you in tracking your vehicle and track it if it's stolen. This is a feature that isn't often available in aftermarket security products however it's an excellent option to boost your vehicle's security and provide you with peace of peace of.
The Ghost-II immobiliser is not just a source of greater security, but also a convenient experience for the user, by not having to use additional key fobs or devices. It features a simple and intuitive PIN code entry system that integrates seamlessly into your daily routine. It also comes with convenience features and deactivation settings that let you to temporarily disable the immobiliser in order to park or service your vehicle.
Before you begin the installation process, familiarise yourself with your vehicle's wiring and prepare the tools. A basic set of hand tools will provide you with the ability to make precise connections, and a multimeter is a great tool to verify electrical values. Insulation tape and heat-shrink tubing is essential to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in an area that is well-lit and wear safety gear when using electrical tools and components.
After you've completed the installation, you should test the Ghost immobiliser to ensure that it's working as intended. The first step is to start the vehicle without entering the PIN code. If this fails, you'll have to test the system again and conduct a more thorough inspection of the connections.
The Ghost Immobiliser, unlike other security systems, is a hidden device which cannot be detected by thieves. It is also far more effective than physical deterrents like wheel clamps and steering locks. It is TASSA approved and recognised by some insurance companies, making it an investment that's cost-effective and will provide you with the peace of mind you deserve.