How to Install a Ghost Immobiliser
A ghost immobiliser is an effective deterrent to car thieves. By using this device in conjunction with other security systems and remaining vigilant, you can create a robust defense against the latest, technologically advanced thieves.
A ghost immobiliser will protect your vehicle from key cloning, hotwiring and relay car theft by needing a pin code to start the engine. It works by using buttons that are already present in your centre console or steering wheel, so it's undetectable to criminals.
Identifying the Wires
It is important to protect your car as more and more vehicles are being stolen without the owner's key. While thieves may be able to copy your key fob, or even steal your vehicle by hacking its system, a ghost immobiliser adds an extra layer of security by blocking all signals from the key fob and making it impossible to start your car without entering a PIN code.
You can install the ghost immobiliser yourself, but it is best to hire a professional to do the job. A professional technician will know where to install the unit and how to connect it to your vehicle's wiring. The installation process is not easy, and it is essential that all connections are done correctly to avoid any problems or damage.
Wearing safety equipment and working in a place which is well-lit will help you achieve the most effective results. It is also recommended to study the user's manual to familiarise yourself the wiring system. This will enable you to determine the wires needed to install the wiring and make sure you have the right equipment and parts.
Once the wiring is connected, you can connect your battery and see if the system is working correctly. You should also make sure that the battery terminals are secure to prevent electrical issues. Finally, you should mark the CAN H and CAN L wires with tape or labels to keep the track of them during the installation process.
If you wish to permit someone else to drive your vehicle temporarily for valet parking or when the vehicle is being used for a service, the Ghost Immobiliser can be put into Transport Mode. You can enter the code by pressing an option on the steering column, centre console, or door panels. The Ghost Immobiliser enters the mode of changing the PIN code.
Some thieves attempt to bypass ghost immobilisers by using jamming or spoofing devices that block or send fake messages to the system. This can be prevented by investing in anti-jamming technology and by regularly checking your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser, a modern security device, is designed to stop car theft. It uses innovative technology to monitor and disable the engine once the correct PIN code is entered, thereby preventing the vehicle from being taken away by thieves. The system is highly effective and stealthy, with no visible indicators to discourage criminals. You may have to take away your device to perform maintenance, upgrades, or when selling your vehicle.
This process requires specialized tools and expertise, since you will be working with wires and removing certain factory components. It is also essential to follow the step by step instructions that are provided by the manufacturer. It is also recommended to consult an experienced mechanic or auto electrician, particularly if you don't have any previous experience working on vehicles.
After identifying the wires and disconnecting them, it is important to verify the condition of your battery. Verify that the battery is clean and free of corrosion, and that all connections are secure. It is needed to ensure that it's sufficient to meet the electrical requirements of a security system aftermarket.
Once you have disconnected the wiring from the battery, you can start to take out the ghost immobiliser. Use strippers or wire cutters to remove the wires, taking care not to damage the wires or their terminals. Label each wire to make it easier to reconnect them in the future. If the wires are soldered together, use a heat resistant tool to break the connection. It is also crucial to cover the cut wires with insulation tape or heat shrink tubing to prevent them from short circuits.
Connect the wires back to the 12V constant power source. If necessary, use a fuse tap to ensure that the connections are protected by fuse. Connect the grounding wire using a solid grounding to the chassis of your vehicle.
Once you have reconnected your wires, start your vehicle and enter the code PIN. Then, try starting the engine once more. If the engine fails to start then you have successfully removed the ghost immobiliser.
Making Connections
Ghost immobilisers are an affordable way to improve the safety and security of your vehicle. It works by connecting to your vehicle's CAN bus system, capturing signals and stopping the engine from starting until the correct PIN code is entered. This device is almost impossible to bypass. It's a great option for those who need extra peace of mind and security. In conjunction with a Thatcham Approved tracking system, it can help reduce your insurance costs.
The process of obtaining and reviewing the wiring diagram of your vehicle model will be essential in the installation process. The diagram will serve as a reference to identify the wires needed for precise connections. The connection will last and secure if you choose the appropriate wiring connectors and the proper soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system have to be properly identified and connected. It is recommended to use small pieces of tape or labels to identify the CAN H and L wires, as this will avoid confusion during the installation process. The position of these wires will be different for every vehicle, which is why it is crucial to check the wiring diagram of your vehicle and online resources for identifying them.
When the correct wires are connected after which the power to the Ghost immobiliser will be restored. It is a good idea to test your immobiliser. Start the engine without entering the code. This will confirm the immobiliser is properly installed and working as intended. It is recommended to test your immobiliser regularly and assist in identifying any issues or problems early on.
Another benefit of the ghost immobiliser is that it can be set up within a matter of minutes and doesn't require any cutting or modification to the internal wiring of your vehicle. It is a fantastic option for those looking to add more security to their vehicle because it can work in conjunction with a Thatcham approved tracker or alarm that will send you a notification on your tablet or phone if the vehicle is tampered with.
Mounting the Unit
The Ghost immobiliser works well as an effective deterrent for car thieves especially when paired with the use of a GPS tracking device. The device uses existing buttons on the central console, door panels and the steering wheel to create an exclusive sequence that only you can recognize to prevent your vehicle from starting. The device is also weatherproof and tamper-proof. It comes with a three-year warranty and is endorsed by many insurance companies.
During the installation process it is important to follow the instructions carefully. While some people are comfortable handling the task themselves, it's best to seek out a professional you are unsure. A wire stripper and multimeter are essential tools for identifying the wires and making precise connections. It is also recommended to purchase electrical tape and insulation to protect the connections against damage. ghost 2 immobiliser near me 's a good idea to test your device after the installation is complete to be sure that it functions as intended.
Ghost immobilisers are a fantastic way to secure your vehicle particularly in areas with high crime rates. It can be linked with an iPhone application to facilitate management and monitoring. It prevents key-cloning, ECU-swapping, and other security threats. It is popular with car owners who want to protect their investment.
The Ghost II immobiliser is designed in a low-profile, sleek appearance that makes it unnoticeable by thieves. It connects to the CAN (Controller Area Network) system of your vehicle and prevents the engine from starting unless a PIN code is entered. The PIN code is generated using a unique sequence of keys on the steering wheel and centre console, as well as the doors. It can be changed at anytime. The device is also tamper proof and has a GPS tracker that can help police find your car in the event of a car theft. It's an excellent option to safeguard your car from thiefs and it's fully Thatcham approved.